Manual Heat Sealing Nylon Bag Machine Hot Manual Plastic Bag Heat Impulse Sealing Hand Sealer Machin

Manual heat sealing nylon bag machine Hot Manual Plastic Bag Heat Impulse Sealing Hand Sealer Machine

Type:FR-200A

Power:300W

The biggest seal length:200mm

Seal thickness:0.6mm

The biggest seal width:2.5mm

Seal time:0.2-2s

Weight:1.8kg

Instructions:

1. The machine does not use the power switch, the AC power cord into the socket, according to the thickness of the material to be sealed to adjust the heating time to put the plastic bag on the sealing surface, and then press the handle, the circuit will automatically control the heating time, , The power will automatically disconnect, about 1-2 seconds later, release the handle, sealing finished;

2. If there is a crack at the seal, it is because the heating time is too long, please rotate the knob in the opposite direction, shorten the heating time

3. If the seal is not strong, it is because the sealing time is too short, please rotate the knob clockwise to extend the heating time;

4. If the plastic sticks on the silica gel, it means that the cooling time is not enough, you must extend the cooling time after the indicator light goes out, please release the handle later;

5. After the heating time is adjusted, it should be used in the same way, do not have to make any adjustments when used continuously;

6. The machine can always plug the AC power cord in the socket, do not charge when the power consumption;